The order for cleaning high-touch surfaces
Start with the places hands touch repeatedly: doorknobs, light switches, remotes, tables, chair backs, handles, desks, toilets and sinks. Remove visible dirt with soap or an appropriate surface cleaner before applying a disinfectant. Soil can interfere with the disinfectant reaching the surface beneath it.
- Check that the cleaner and disinfectant are suitable for the material. Follow the product label for protective gear and ventilation.
- Clean the surface, working around electronics and finishes according to their care instructions.
- Apply disinfectant at the label's dilution, if dilution is required. Keep the surface visibly wet for the full contact time on that label.
- Follow label directions for wiping, rinsing or allowing the surface to dry. A microfiber towel can be used where wiping is directed.
Routine cleaning is often enough when nobody at home is sick. Disinfection is more useful when someone has COVID-19 or when a surface has been contaminated by a sick person's respiratory secretions.
Choosing and applying a disinfectant
A disinfectant must be used as its label directs to support a claim against the virus that causes COVID-19, SARS-CoV-2. Check the EPA registration number on the container against EPA disinfectant resources, then confirm the product's approved surfaces, required dilution and contact time. A product's inclusion on an EPA list does not make every use or material appropriate.
Contact time, sometimes called dwell time, is the period the treated surface must remain wet. If it dries early, follow the label's directions for reapplication rather than wiping immediately. We use MediClean in our cleaning work, including carpet and tile cleaning and treatment of our hoses, tools and equipment. Product directions determine how a particular application is prepared and used.
Concentrated products and bleach safety
For a concentrate, measure both the product and the water according to the exact container's label. Do not use a single dilution for every task: the labeled ratio may depend on the organism, surface and application method. Prepare only what you can use within the label's stated storage period, and keep the solution in a clearly labeled container away from children and pets.
If you use bleach on a compatible floor, follow the bleach product's current label for dilution and contact time. Open windows or otherwise provide ventilation, wear the protection the label calls for, and never mix bleach with ammonia, acids, vinegar or another cleaner. Test an inconspicuous area if the floor finish may be affected. Do not apply bleach to carpet or other materials unless their care instructions permit it.
Carpet cleaning and claims about disinfection
We use truck-mount steam cleaning for carpet. The source of the hot water can reach 220 degrees, and we use MediClean in our carpet-cleaning work. Cleaning can remove soil from carpet fibers, but hot water at the machine is not proof that every part of a carpet reaches a virus-inactivating temperature for a sufficient time. A disinfectant claim also depends on whether the product label covers that carpet application and its required contact time.
For a carpet that has seen heavy foot traffic, focus on soil removal and thorough drying rather than treating it as a barrier against infection. In the Houston area, humid conditions can slow drying. Ventilation or air movement, where practical, helps moisture leave the carpet; avoid replacing furniture or walking on damp areas until they are dry.
Tile and grout cleaning
For tile and grout, we use truck-mount cleaning with 220-degree hot water and 1200 psi, along with MediClean. Hot water and pressure help remove built-up soil from grout lines. They do not, by themselves, establish that a finished floor has been disinfected. The tile, grout, sealant and surrounding surfaces also matter when choosing a cleaning method and product.
If your main concern is a recently used bathroom or kitchen, give frequently touched fixtures separate attention. Cleaning grout does not replace wiping sink handles, toilet flush handles or light switches with a product appropriate for those surfaces.
Choosing the right level of cleaning
The work involved changes with the surfaces and their condition. A few washable hard surfaces need a different approach from a heavily soiled carpet or grout with embedded buildup. Room size, the amount of soil, surface compatibility, access to the area, required product contact time and drying needs can all affect the scope of work and its cost. Decide first whether you need routine cleaning, targeted disinfection of hard surfaces, or professional cleaning of carpet or tile.
We are a local Aggie-owned, veteran-founded cleaning service in the Houston area. To discuss carpet or tile cleaning, call or text (832) 303-3546.


